Transparent MS polymer adhesive – for installing Gerflor Mural Revela
A watertight bathroom depends on proper bonding. Use this transparent MS polymer adhesive to fix your Mural Revela wall panels securely to the substrate – even directly over existing tiles – and to reliably seal the tongue-and-groove joints in shower areas.
Important: In shower areas, additional bonding of the tongue-and-groove joints with MS polymer adhesive is mandatory to achieve the watertight surface specified by the manufacturer. Silicone is not suitable for PVC – MS polymer bonds far better with the material.
Your benefits
- One product for both steps: bonding the panels and sealing the joints in wet areas
- Transparent – no visible adhesive at the joints
- Soft-setting MS polymer, as recommended by Gerflor: stays workable longer, so panels can be aligned without rush
- Applied straight from the cartridge – no notched trowel, no mixing
- Bonds to old tiles too: renovate without demolition, dust or noise
- Also suitable for fixing the Mural Revela finishing profiles
Application
The process is shown step by step in the Gerflor installation video linked on the Mural Revela wall panels. In short: apply beads of adhesive to the back of the panel, align and press it on. In shower areas, also run a bead into the groove before sliding in the next panel. Remove excess adhesive immediately. Please follow the manufacturer's installation instructions.
Tip: Order the adhesive together with your panels and profiles – so you have everything ready on installation day.
Contents: 1 cartridge (fits standard caulking guns)
